4 Ways to Hold Cutter While Using Die Grinder
When it comes to using power tools, utmost care and a good load of knowledge is important. You can just use a drill or electric saw without knowing what it is and what it can do. Doing that can seriously hurt you or your loved ones, and even damage your property.
These tools were invented to make life easier for you, so if you ever find yourself needing to utilize one for any kind of project, you should be well prepared to do so.
Die grinders are some of the most useful tools in the industry. As these rotary tools can help you get the job done with relative ease, it’s best to know how to properly use them. Especially since they can create a great force, proper operation is necessary.
Also Read: 7 Safety rules for Die Grinder
How to Hold Cutter
One of the most basic things to know when operating a power tool like a die grinder is how to attach its accessories. This is very important to note as not only will it help you get the job done, but it is at the core of ensuring your safety while wielding one of these units.
Doing so should be done with great care and know how as it can definitely make or break your initial experience with this rotary tool. To hold a cutter, die grinders make use of a collet.
This is a sub type of a chuck that clamps down on an object. It requires tightening to really secure cutters to the die grinder. The use of this design makes perfect sense for a die grinder as it guarantees better grasp on cutters.
As die grinders produce high RPMs, you have to be absolutely sure that the attachments are secured to the tool before use. Any chance of your drill bits, discs, and wheels getting dislodged could seriously damage your work piece and injure you.
So, making sure to properly secure your cutters to your grinder is imperative.To do that, follow these steps:
Ready Your Die Grinder for Cutter Attachment
Make sure that the unit is turned off and unplugged. Check if there’s anything stuck down the collet or the hole where the cutter should go into. Make sure it’s all clear.
Also Read: The Chuck and Collet Method
If there’s a different cutter attached to the unit, remove it. To do this, grab two wrenches. Place one on the chuck and the other on the shaft to hold it still. Turn the wrench placed on the chuck to loosen its grip on the cutter and pull the cutter out.
Insert Your Cutter of Choice into the Collet
Grab the cutter you need and place it inside the collet. Do not push it all the way down. Leave a tiny bit of space between the bottom of the collect and the end of your cutter to prevent the parts from creating any friction.
Secure the Cutter into the Die Grinder
To ensure that the cutter is properly attached to your die grinder, you need to tighten the hold of your tool into the attachment. To do this, you’ll need two wrenches again. Use one to hold the shaft in place and the other one to tighten the hold of the collect on the cutter.
You only need to twist the wrench on the collect to tighten it and just hold the other wrench in place to prevent it from moving around.
Check If the Cutter Is Properly and Ttightly Secured
Give your cutter a few tugs and shake to make sure that it is securely attached to your die grinder. If it feels loose, tighten it more with the help of two wrenches. If it didn’t budge, you’re all good to go.
Additional Safety Measures to Observe When Working with a Die Grinder. Aside from making sure that the cutter is attached properly in the die grinder, there are lots of other safety measures that you need to observe when using this rotary tool. Some of these include:
Knowing how to use a die grinder properly is a must, especially if you plan on handling one soon. While experience will be the best teacher, knowing a few things in theory wouldn’t hurt. So even if you’re just reading about the right way to attach a cutter to a die grinder here, it could already be a lot of help.