How to Use a Cylindrical Grinder?

If you are not completely familiar with what a cylindrical grinder is capable of doing, then it is high time that you start researching on what it does, so that you can gain a better understanding of the power tool if you are to use it in the future.

More...

A cylindrical grinder is a type of grinding machine that is actually used to shape the outside of an object. This power tool can work on a variety of shapes but should always have a center of axis for it to cut through the material properly.

Also Read: Using chuck system in the cylindrical grinder

It usually includes cylinders, ellipses, and a crankshaft. These tools are usually used by professional construction workers or factory workers to make specific changes in pipes and other metal materials that is used for boats, piping systems, and buildings. 

If you want to find out and study up on how these machines work, then you should make sure to study up on its functions so that when you are faced with one, you can easily determine what it is for.

Also Read: Safety rules for using cylindrical grinder

cylindrical grinder

Use a cylindrical grinder

There are a lot of ways that you can use a cylindrical grinder, but you must always make sure that you use it properly. These machines can be very dangerous, and can really hurt you seriously if you fail to use it the right way.

The centerless grinding process is usually accomplished by feeding stock between a fixed blade and a rotating roller that regulates as well as a grinding rotating wheel. The roller that is regulated is used to control the part’s rotation.

The action, which is to feed the stock, is advanced by skewing slightly the blade axis in relation to the roller regulation, causing the roller to pull across the face of the grinding wheel. Gravity comes into play by holding the work piece, guide blade and roller together.

centerless-grinding-process

When moving the wheel, you must remember to move it toward or away from the guiding blade and roller regulator. The regulating roller will control the precise diameter.

Once the spots are on a round, the diameter will be reduced to the preferred range. Dissimilarity with the process can produce parts in the profile.

Instead of the work piece being fed through the grinder, the located part against a specially stopped dress wheel is crisscrossed into the part, while the profile is crushed and grinded into the work piece.

Higher volumes is better for this process in general, because as the wheels that are used to grind is expensive and large, it can often be too time consuming If you were to custom the dressing.

To achieve a perfect roundness that is best desired, you will usually require the stock to be centerless and ground before grinding.

Purpose of a Grinding Hardening Cycle

To be able to achieve the desired outcome (for hardened surfaces) through grinding, it is important to finish a three-phase grinding cycle.

  • The primary phase is standard grinding operation and it is done just to eliminate previous imperfections that were the result of prior machining operations;
  • The next phase is basically the hardening cycle, which involves a very assertive roughing grinding operation to ascertain that workpiece’s heating, to occur.
  • The last phase is the finishing, with a view to attaining the desired surface quality and taking out ground surface stress.

Final Words

In conclusion, the cylindrical grinding machine is a very useful piece of machinery and can be used for a number of functions. This machine is more recommended for people who works in heavy duty machine companies.

Related Resources:

Click Here to Leave a Comment Below 0 comments