Fix 4 Common Issues of a Vacuum Cleaner
Once your vacuum cleaner stops functioning, you might be drawn to just replace it, particularly if it is an outdated model. However, the issue will frequently be simple to repair. Knowing how to fix a vacuum cleaner by spending some time examining the issue can save you huge amount of money.
Also Read: How to pick a Good Vacuum Cleaner
The initial step you need to take is to examine is the cylinder or bag on your cleaner. If it is already full, there will surely be zero suction. Just take away the old cylinder or bag and empty it prior to replacing with a fresh one.
Turn on the cleaning machine to check if it picks up dust and dirt. Changing the bag before it is totally full maintains the cleaner running more effectively and puts less tension on the motor so your vacuum cleaner will last longer.
Suction Minus Picking Up
If there is sufficient suction but the cleaning machine won’t pick up items, inspect the hose for obstructions. Detach the hose from the cleaner and check it for any holes or cracks. If any are seen, you may use tape to repair them.
Where there is a blockage in the cleaner, take it out by pushing a lengthy, thin item such as a broom handle through the hose. You can connect up the hose and try to use the vacuum once more. It is worth inspecting the hoses several times every year for splits or cracks.
Inspect the inside of the vacuum that holds the bag to confirm that debris and dust is not found outside of the cylinder or bag. If dust and debris is present in the bag, it is necessary to change the bag since there’s a hole in it.
Many vacuum cleaners have numerous filters that can become blocked with dust and debris. If these filters are congested, the suction will not be as powerful as it should be.
Inspect all the filters by removing them and cleaning them with clean water. Place it under the faucet, run the water until the one coming out from the filter is already clear.
Don’t use any chemicals or cleaners to clean the filter. Be sure your filters are totally dried prior to placing them back to the cleaning machine for use. If the filter is not completely fry it can damage the motor on your vacuum cleaner.
If everything else seems to be fine but your vacuum cleaner still won’t pick up debris, take a look at the brush roll. Turn the cleaner upside down and remove hair and other objects from the brush roll, especially at the side of it.
Fixing a Damaged Belt
One normal problem is a broken or worn belt. Unsnap or unscrew the cover plate and inspect the belt of the cleaner for wear and tightness. If there is extreme damage in the belt or it seems to be broken or split, just replace it.
Simply ease the brush out of its cover and slip it off before placing on a new one. Position one edge of the belt above the drive shaft and the other end into the brush. Put the brush back to the cleaning machine. Turn the brush roll by hand several times to see if it moves tightly but easily.
When the power breaks and the machine won’t start, inspect the circuit. Has the machine blown a fuse or tripped a circuit breaker? Examine the fuses or circuit breakers, and if it has, just replace the fuse or reset the breaker and switch the vacuum cleaner on.
If it continues to occur, you may have too much appliances on the similar circuit so unplug some appliances and try again.
Whether you have an outdated vacuum cleaner or a newer model, vacuum cleaner is one of the modest household appliances found in many homes nowadays. And while the components of your vacuum cleaner may seem very simple, it still entails some maintenance and repair.
The above list of the most common vacuum cleaner issues and how to fix a vacuum cleaner are some things a homeowner can try engaging in on their own.
If you have made it down the possible maintenance concerns and your vacuum cleaner still doesn’t work properly, it may be the right time for you to call a vacuum repair.