How to Clean Bathroom Tiles Easily with Cleaning Solutions?

Does your bathroom tile already need some cleaning? But you feel like you will have a hard time cleaning the grout? Well worry no more, because there are useful tips and easy steps that you can follow to clean your bathroom tile thoroughly. 


Here are some helpful bits of information on how to clean bathroom tile that will surely help you get the job done.

Though cleaning the bathroom tile seems to be more difficult than cleaning other parts of the bathroom, there are great tools and cleaning solutions to make this task a bit easier.

Use a Microfiber Mop

If your problem is what to use in cleaning the bathroom tile, forget all your worries because there is one tool that can definitely help you clean the bathroom tile easily and effectively—it is the microfiber mop.

Microfiber Mop

You can clean your bathroom tile without putting too much strain in your arms.

Use a Steam Cleaner

A steam cleaner is a useful cleaning tool that can be used on the different surfaces of the house. It is an effective tool in removing built-up dirt, so you can really use it to clean your bathroom tile.

Steam Cleaner

All you need to do is to heat the tile so the steam cleaner can open up pores in the material’s surface. Afterwards, steam the tile surface and wipe off the dirt.

Use a DIY Cleaning Solution

If you feel like doing your own cleaning solution for your bathroom tiles, go ahead. To give you an idea on how you can make your own cleaning solution, here are some tried and tested recipes:

Vinegar and baking soda mixture. Perhaps the easiest recipe in making your own cleaning solution is diluting a mixture of baking soda and vinegar in water.

You can place the finished solution in an empty spray bottle. If you’re asking how it works, here is the explanation. The baking soda can scrub the tile surface and remove unwanted odors; while the vinegar serves as a degreaser.

homemade-cleaning solution for tile floors

You should leave the solution for at least one minute to completely soften the build-up. Afterwards, you can now wipe off the tile surface using a wet microfibre cloth.

Bleach and bicarbonate of soda. Bleach, being a disinfectant, can whiten the tiles and grout back to its original color. However, it can also bring some foul-smelling gases so you must take appropriate precautions whenever you use bleach.

Wear mask and gloves while doing the solution. Also, make sure that you work in a well-ventilated area. After you have already applied the mixture to your bathroom tiles, wait for one hour before you wash it off.

Use Tried and Tested Cleaning Solutions

If you want to spare yourself from doing your own cleaning solution, you can always choose from a wide array of cleaning solutions you can find in the market.

At first, you may find it overwhelming to decide which cleaning solution you will use; but, in the end, you will find yourself arriving at the best decision. Here are some quick guidelines on how to choose the best cleaning solution:

  • It is manufactured by a well-known manufacturer, or its manufacturer has already produced previously successful products in the past.
  • It has been in the market for not less than three years. Although you can make an exception for new products that continue to get good reviews by many consumers.
  • Even new products can make a difference in your bathroom tile cleaning. All you need to do is to be careful in choosing which product stays true to its reputation, and which are not.
  • It is stated that it is safe for daily use, and has been approved for commercial use, as well. You can also do your own research to confirm its stated standards.
  • Its instruction manual is easy to read, so you won’t have a hard time following the step-by-step procedures.

The process in cleaning your bathroom tile is very easy. With the right tools and adequate knowledge on how to do it, you will surely finish this task smoothly. Here are general tips that can wrap up the process for you:

  • Make sure that your bathroom is well-ventilated before you clean your bathroom tile. You need enough air while cleaning the bathroom tiles, because you are holding solutions that can be harmful if there’s no proper ventilation in the area. A small window in the bathroom may do the trick for proper ventilation.
  • Wear face mask and hand gloves before you start cleaning your bathroom tile. Cleaning solutions, when inhaled directly, can cause difficulty in breathing so it is important that you wear face mask. Hand gloves, on the other hand, can protect your hands from directly absorbing harmful chemicals.
  • Turn on the shower on high temperature so the ceramic pores can open up. If you don’t have a steam cleaner, the shower heater is a nice replacement, as it can also open up the ceramic pores. It may just take longer, but it surely works.
  • Start cleaning on a small area, so you can test the cleaning solution. It will also ensure that no damage will occur in your bathroom tile. Although many cleaning solutions are found to be effective, there are rare instances wherein they failed due to several reasons. One of which is the failure to follow concrete instructions.
  • You can also use an old toothbrush to scrub the bathroom tile. If you don’t have the bathroom brush, which is commonly a brush with a long handle, your old toothbrush can also perform the particular function.


Cleaning your bathroom tile should never be a problem now. You can surely carry out this task on your own after you have discovered that there are effective tips that you can follow on how to clean bathroom tile.

If you find this article helpful, please share it with your family and friends via social media, so they can also be guided accordingly.

Related Resources:

Click Here to Leave a Comment Below 0 comments